VentaFax & Voice - 64bit support

2019-May-27 | Tags: faxvirtual printerwin10-64bitwin8-64bit

Start64!VentaFax products are intended for sending and receiving fax and voice messages via a fax modem (regular telephony) or the Internet (IP telephony). The products support 32- and 64-bit MS Windows operating systems (Windows 8, 7, Vista, XP, 2000).

VentaFax allows you to receive and transmit facsimile messages with ease. Just as with a typical fax machine, fax reception can be performed both in manual and auto-answer mode. Received facsimile messages are saved as files in a standard graphics format and can be printed automatically. If you don’t wish to print the messages you receive immediately, you can view and print them later, using the Message Manager application.


VentaFax & Voice - under x64


VentaFax & Voice - under x64


VentaFax & Voice - under x64

Setting up virtual printer VENTAFAX in Windows XP x64 and Server 2003 x64

"Add Printer" wizard is used to set the virtual printer VENTAFAX up.

  1. Select "Local Printer", uncheck "Automatically detect and install my
    Plug and Play printer" and press "Next>" button.
  2. Check VFax: port and press "Next>" button again.
  3. Press "Have Disk" button and find the folder there VentaFax is installed. Select ventafax64.inf by pressing "Open" and then "OK" buttons.
  4. Press "Next>" several times until "Finish" button appear.
  5. After that the wizard will start copying files. When "Digital Signature
    Not Found" message appears, continue installation by pressing "Yes". If
    Windows installation disk is asked, put it into your drive.
  6. To make sure that virtual printer is set up properly, agree to print a test page when you will be asked about it. The VentaFax Transmission windows opens. Press View button to view the test page prepared.


VentaFax & Voice - under x64

  • Version:
  • Release Date: 2019-05-27